If you cannot sign in to the qBittorrent Web UI, these are the most common causes and fixes.
Credentials. Your Web UI username is your seedbox account username, the same one you use for the control panel and SSH. The Web UI sign-in is set at signup to match your seedbox account sign-in from your welcome email, and a new password generated for the service sets the Web UI password again (How do I change my seedbox password?). The legacy qBittorrent factory default mentioned in some older guides no longer applies on current Pulsed Media seedboxes: try the sign-in from your welcome email first.
If you changed the Web UI password from inside qBittorrent (Tools → Options → Web UI) and can't remember what you set, generate a new password for the service, or open a support ticket from your registered email address and we will set a new password for the service. Either way the new password also replaces your web panel, SSH, SFTP and FTP password (How do I change my seedbox password?). qBittorrent restarts when its password is reset, so allow a few minutes before you try again. The Web UI username is not changed by this: it starts out as your account username and stays as you set it in qBittorrent.
If the tab shows an error or fails to load, the qBittorrent process may not be running. Start it from the control panel, wait a few seconds, then reload the tab. If you have SSH access, you can also check with ps aux | grep qbittorrent-nox.
If it still fails, check recent announcements on our status page or contact support. Include the exact error message you see and roughly when it started, that lets us trace the cause quickly.
Related: the Troubleshooting Seeding Issues wiki article, and the KB article on 503 errors for the qBittorrent tab.
